output definitions
Group Name
From
Entries
Release History
Release 6.1; command was introduced.
Related Commands
policy network group
MIB Objects
alaQoSNetworkGroupsTable
alaNetworkGroupsName
alaNetworkGroupsSource
alaNetworkGroupTable
alaNetworkGroupIpAddr
alaQoSNetworkGroupIpMask
page 33-204
The name of the port group, configured through the policy network
group command.
The way the group was configured: blt indicates a built-in entry; cli
indicates that the entry was configured on the switch; ldap indicates the
entry was configured through PolicyView
The IP addresses associated with the network group.
Configures policy network groups.
QoS Policy Commands
OmniSwitch CLI Reference Guide
June 2012