Show Policy Action - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

QoS Policy Commands

show policy action

Displays information about pending and applied policy actions configured on the switch.
show [applied] policy action [action_name]
Syntax Definitions
applied
action_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Information for all policy actions displays unless action_name is specified.
•
The display may include any of the following characters:
character definition
+ Indicates a new policy action.
- Indicates the policy action is pending deletion.
# Indicates that the policy action differs between the
pending/applied actions.
Examples
-> show policy action
Action Name From
-----------+----+------+---+-----+---+---+---+---+---------+----+---+---+---
A3 cli
+A4 cli
A5 cli
A6 cli
+A7 cli
+A8 cli
action1 cli
action2 cli
OmniSwitch CLI Reference Guide
Indicates that only actions that have been applied should be displayed.
The name of the action for which you want to display information; or a
wildcard sequence of characters for displaying information about
actions with similar names. Use an asterisk (*) to indicate a wildcard
character.
Bandwidth
Disp Pri Share Min Max CIR PIR Max-Depth Bufs CBS PBS To
accept No
accept No
accept No
accept No
accept No
accept Yes
accept No
accept No
June 2012
10M
10M
10M 10M
10M 20M
10M 20M
Burst size
4K
4K
4K
4K 40M
page 33-217