Ethoam Domain Mhf - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet OAM Commands

ethoam domain mhf

Configure the Message Handling Function (MHF) value for MD entry.
ethoam domain name mhf {none | explicit | default}
Syntax Definitions
name
none
default
explicit
Defaults
parameter
none | explicit | default
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Domain must be created before it is modified.
Examples
-> ethoam domain MD mhf default
Release History
Release 6.3.1; command was introduced.
Release 6.4.3 domain_name | mac_address parameters replaced with name parameters; none parameter
added.
Related Commands
show ethoam
MIB Objects
dot1agCfmMdTable
dot1agCfmMdName
dot1agCfmMdMhfCreation
OmniSwitch CLI Reference Guide
Specifies the domain name used while creating the management domain
for which this management association is created.
No MHFs can be created.
MHFs can be created.
MHFs can be created only if a MEP is created at some lower MD Level.
default
none
Displays the information of all the Management Domains (MD)
configured on the bridge.
June 2012 page 45-7