Show Router Ldp Discovery Peer - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

MPLS LDP Commands

show router ldp discovery peer

Displays the discovery status of the LDP Hello adjacencies associated with the specified LDP peer.
show router ldp discovery peer ip-address [state {trying | established | down}] [detail]
Syntax Definitions
ip-address
trying
established
down
detail
Defaults
By default, the discovery status for the LDP Hello adjacencies with the specified LDP peer is displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
Use the state parameter with the trying, established, or down options to display LDP adjacencies that
are in a specific state of discovery.
•
Use the detail parameter to display additional discovery information and statistics for the adjacencies.
Examples
->show router ldp discovery peer 10.11.0.6
LDP Hello Adjacencies
Interface Name
--------------------------------+---------------+---------------+--------------
vlan-30
No. of Hello Adjacencies: 1
->show router ldp discovery peer 10.11.0.6 detail
LDP Hello Adjacencies (Detail)
Peer 10.11.0.6
Local Address:
Adjacency Type:
Up Time:
Hello Mesg Recv:
Local IP Address:
Local Hello Timeout: 15,
OmniSwitch CLI Reference Guide
The IP address of the LDP peer.
Displays LDP interfaces that are trying to establish an adjacency with
peers.
Displays LDP interfaces that have established adjacencies with peers.
Displays LDP interfaces with adjacencies that are down.
Displays detailed information for LDP hello adjacencies.
Local Addr
10.11.0.66
10.11.0.6,
Link,
0d 03:14:22,
2917,
30.30.30.66,
June 2012
Peer Addr
10.11.0.6
Peer Address:
State:
Hold Time Remaining:
Hello Mesg Sent:
Remote IP Address:
Remote Hello Timeout: 15,
AdjType State
Targ Estab
10.10.0.7,
Established,
15,
2917,
30.30.30.77,
page 48-57