Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3192

Related Commands
configure service sdp create
configure service sdp
description
configure service sdp far-end
configure service sdp ldp
configure service sdp signaling
configure service sdp adv-mtu-
override
configure service sdp path-mtu
show service sdp-using
show service id sdp
MIB Objects
sdpInfoTable
sdpId
sdpAdminStatus
page 50-18
Configures an SDP, which is used to a direct traffic to another router
through MPLS-based service tunnels.
Configures a description for the specified SDP.
Configures the system IP address of the far-end destination router for
the SDP.
Enables or disables an LDP-signaled Label Switch Path (LSP) for the
specified SDP.
Enables or disables auto-label signaling for the specified SDP;
Enables or disables VC-type MTU override for the specified SDP.
Configures the administrative MTU value for the SDP.
Displays the SDP usage for the local router or for a far-end router IP
address.
Displays the SDP configuration for the specified service.
Virtual Private LAN Service (VPLS) Commands
OmniSwitch CLI Reference Guide June 2012