Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2571

AAA Commands
•
If local is specified as server1, the switch will only use the local Switching Logging facility for
accounting.
•
If local is specified as a backup, it should be entered last in the list of servers. The Switch Logging
facility is always available if the switch is up.
•
The switch uses only the first available server in the list for accounting. For example, if server1 is not
available, the switch will use server2.
•
RADIUS, TACACS+, and LDAP servers may each have an additional backup specified through the
aaa radius-server,
Examples
-> aaa accounting vlan ldap1 ldap2 ldap3 radius1
-> no accounting vlan
-> aaa accounting vlan 4 radius1 ldap2 local
Release History
Release 6.1; command was introduced.
Related Commands
aaa radius-server
aaa tacacs+-server
show aaa accounting
MIB Objects
aaaAcctVlanTable
aaacvName1
aaccvName2
aaacvName3
aaacvName4
aaacvRowStatus
OmniSwitch CLI Reference Guide
aaa tacacs+-server, and
Configures or modifies a RADIUS server for Authenticated VLANs or
Authenticated Switch Access.
Configures or modifies an LDAP server for Authenticated VLANs or
Authenticated Switch Access.
Displays information about accounting servers configured for Authenti-
cated VLANs.
June 2012
aaa ldap-server commands.
page 36-37