Ethoam Association Endpoint-List - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet OAM Commands

ethoam association endpoint-list

Modifies the MEP list of an Ethernet OAM Maintenance Association.
ethoam association ma_name domain {md_name | mac_add}
endpoint-list mep_id[-mep_id2]
no ethoam association association_name domain {domain_name | mac_add}
endpoint-list mep_id[-mep_id2]
Syntax Definitions
ma_name
md_name
mac_add
mep_id
mep_id2
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of this command to remove the MEP list.
•
Note that only the MEP that is associated with the MEP list of the MA can be configured locally on the
bridge or monitored remotely.
•
The ma_name should be unique within a domain.
Examples
-> ethoam association MA domain MD endpoint-list 100-200
-> no ethoam association MA domain MD endpoint-list 100-200
Release History
Release 6.3.1; command was introduced.
OmniSwitch CLI Reference Guide
Name of the Ethernet OAM Association. Up to 48 (minus domain name
length) characters may be used.
Specifies the domain name. For more information on the different
formats of the domain name, refer to
page 45-5
Specifies the CFM system MAC address.
Specifies the MEP number.
Last MEP number in a range of MEPs you want to configure.
June 2012
ethoam domain command on
page 45-17