VLAN Stacking Commands
ethernet-service sap
Creates a VLAN Stacking Service Access Point (SAP) and associates the SAP with a VLAN Stacking
service.
ethernet-service sap sapid service-name service-name
no ethernet-service sap sapid
Syntax Definitions
sapid
service-name
Defaults
The "default-sap-profile" profile is automatically associated with the SAP ID when the SAP is created.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of this command to delete a VLAN Stacking SAP. When a SAP is deleted, all port
and CVLAN associations with the SAP are also deleted.
•
The service name specified with this command must already exist in the switch configuration. Use the
ethernet-service service-name command to create a service to associate with the SAP.
•
Each SAP ID is associated with only one service. However, it is possible to associate one service with
multiple SAP IDs.
Examples
-> ethernet-service sap 10 service-name CustomerA
-> no ethernet-service sap 11
Release History
Release 6.3.1; command was introduced.
OmniSwitch CLI Reference Guide
The SAP ID number identifying the service instance (1-1024).
The name of the service to associate with this SAP.
June 2012
page 44-13