Show Ethernet-Service Nni - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

VLAN Stacking Commands

show ethernet-service nni

Displays configuration information for VLAN Stacking Network Network Interface (NNI) ports.
show ethernet-services nni [slot/port | linkagg agg_num]
Syntax Definitions
slot/port
agg_num
Defaults
By default, all NNI ports are displayed if a slot/port or link aggregate ID number is not specified.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
Use the slot/port or linkagg agg_num parameter to display information for a specific switch port or link
aggregate ID.
Examples
-> show ethernet-service nni
Port TPID Legacy STP BPDU Legacy GVRP BPDU Legacy MVRP BPDU Transparent Bridging
-----+------+---------------+----------------+----------------+--------------------
1/22 0x8100
1/23 0x8100
- show ethernet-service nni 1/23
Port TPID Legacy STP BPDU Legacy GVRP BPDU Legacy MVRP BPDU Transparent Bridging
-----+------+---------------+----------------+----------------+--------------------
1/23 0x8100
output definitions
Port
TPID
Legacy STP BPDU
Legacy GVRP BPDU
Legacy MVRP BPDU
Transparent Bridging
OmniSwitch CLI Reference Guide
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The link aggregate ID number (0–31).
Disable Disable
Disable Disable
Disable Disable
The slot/port number or link aggregate ID for the NNI port.
The vendor TPID value configured for the NNI port.
Whether or not the NNI port will process STP legacy BPDU.
Whether or not the NNI port will process GVRP legacy BPDU.
Whether or not the NNI port will process MVRP legacy BPDU.
Whether or not transparent bridging is enabled for the NNI port.
June 2012
Disable Disable
Disable Disable
Disable Disable
page 44-41