Show Router Ldp Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

MPLS LDP Commands

show router ldp status

Displays status information and statistics for the LDP instance on the local router.
show router ldp status
Syntax Definitions
N/A.
Defaults
N/A.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Use the information and statistics displayed with this command to determine the status of the local LDP
instance.
Examples
->show router ldp status
LDP Status for LSR ID 10.10.0.7
Admin State:
Created at:
18:38:14,
Last Change:
Import Policies:
Active Adjacencies:
Active Interfaces:
Active Peers:
Addr FECs Sent:
Serv FECs Sent:
Attempted Sessions:
No Hello Err:
Max PDU Err:
Bad LDP Id Err:
Bad Mesg Len Err:
Malformed TLV Err:
Shutdown Notif Sent: 0,
output definitions
Adm
Opr
Created at
Up Time
OmniSwitch CLI Reference Guide
Up,
03/25/2009 16:08:06,
03/25/2009 16:08:06,
None,
2,
1,
1,
1,
1,
0,
0,
0,
0,
0,
0,
The administrative state of the LDP instance (Up or Down).
The operational state of the LDP instance (Up or Down).
The date and time the LDP instance was created.
The length of time, in hundredths of seconds, that the LDP instance has
been operationally up.
June 2012
Oper State:
Up Time:
Tunn Down Damp Time (sec):
Export Policies:
Active Sessions:
Inactive Interfaces:
Inactive Peers:
Addr FECs Recv:
Serv FECs Recv:
Param Adv Err:
Label Range Err:
Bad PDU Len Err:
Bad TLV Len Err:
Keepalive Expired Err:
Shutdown Notif Recv:
Up,
0d
N/A,
None,
2,
0,
0,
2,
1,
0,
0,
0,
0,
0,
0
page 48-77