Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3147

MPLS Static LSP and FRR Commands
Related Commands
configure router mpls interface
configure router mpls interface
label-map
configure router mpls interface
label-map swap next-hop
configure router mpls interface
label-map shutdown
show router mpls label
MIB Objects
mplsInSegmentTable
mplsInSegmentXCIndex
mplsOutSegmentTable
mplsOutSegmentXCIndex
mplsOutSegmentRowStatus
mplsXCTable
mplsXCRowStatus
OmniSwitch CLI Reference Guide
Enables MPLS Protocol support on an IP interface.
Configures an incoming label number that the specified MPLS interface
will process.
Configures the outgoing label number that is swapped for the specified
incoming label number and the IP address for the next router in the
static LSP.
Configures the administrative status for the label mapping.
Displays the MPLS labels that are exchanged.
June 2012 page 49-11