Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3134

Alcatel-lucent omniswitch 6850-48: reference guide
Hide thumbs Also See for OmniSwitch 6850-48:
Table of Contents

Advertisement

output definitions
Last Change
Tunn Down Damp Time (sec)
Import Policies
Export Policies
Active Adjacencies
Active Sessions
Active Interfaces
Inactive Interfaces
Active Peers
Inactive Peers
Addr FECs Sent
Addr FECs Recv
Serv FECs Sent
Serv FECs Recv
Attempted Sessions
No Hello Err
Param Adv Err
Max PDU Err
Label Range Err
Bad LDP Id Err
Bad PDU Len Err
Bad Mesg Len Err
Bad TLV Len Err
Malformed TLV Err
page 48-78
The date and time the LDP instance was last modified.
The amount of time, in seconds, the tunnel has been down.
None (not supported).
None (not supported).
The number of active adjacencies (established sessions) associated
with this LDP instance.
The number of sessions in the process of actively attempting to estab-
lish a session.
The number of active (operationally up) interfaces associated with this
LDP instance.
The number of inactive (operationally down) interfaces associated with
this LDP instance.
The number of active LDP peers.
The number of inactive LDP peers.
The number of address (prefix) FEC labels sent to the peer associated
with the FEC.
The number of address (prefix) FEC labels received from the peer
associated with the FEC.
The number of service FEC labels sent to the peer associated with the
FEC.
The number of service FEC labels received from the peer associated
with the FEC.
The number of attempted sessions for this LDP instance.
The number of "Session Rejected" or "No Hello Error" notification
messages sent or received by this LDP instance.
The number of "Session Rejected" or "Parameters Advertisement
Mode Error" notification messages sent or received by this LDP
instance.
The number of "Session Rejected" or "Parameters Max PDU
Length Error" notification messages sent or received by this LDP
instance.
The total number of "Session Rejected" or "Parameters Label Range
Error" notification messages sent or received by this LDP instance.
The number of bad LDP identifier fatal errors detected for sessions
associated with this LDP instance.
The number of bad PDU length fatal errors detected for sessions asso-
ciated with this LDP instance.
The number of bad message length fatal errors detected for sessions
associated with this LDP instance.
The number of bad TLV length fatal errors detected for sessions asso-
ciated with this LDP instance.
The number of malformed TLV value fatal errors detected for sessions
associated with this LDP instance.
MPLS LDP Commands
OmniSwitch CLI Reference Guide
June 2012

Advertisement

Table of Contents
loading

Table of Contents