Policy Server Commands
policy server flush
Removes all cached LDAP policy data from the switch.
policy server flush
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
Use this command to remove LDAP policies. Policies configured through the CLI or SNMP are not
removed.
Examples
-> policy server flush
Release History
Release 6.1; command was introduced.
Related Commands
policy server load
MIB Objects
serverPolicyDecision
OmniSwitch CLI Reference Guide
Downloads policies from a LDAP server. These policies are created
through the PolicyView management application.
June 2012
page 34-3