802.1X Captive-Portal Address - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

802.1X Commands

802.1x captive-portal address

Configures a different subnet for the Captive Portal IP address (10.123.0.1).
802.1x captive-portal address ip_address
Syntax Definitions
address
Defaults
By default, the Captive Portal IP address is set to 10.123.0.1.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
If the 10.123.0.1 subnet is already in use on the network, use this command to change the second octet
of this IP address. Note that the second octet is the only configurable part of the Captive Portal IP
address that is allowed.
•
This IP address is used exclusively by the Captive Portal feature to serve various pages and to assign a
temporary IP address for a client device that is attempting web-based authentication.
Examples
-> 802.1x captive-portal address 10.11.0.1
-> 802.1x captive-portal address 10.124.0.1
Release History
Release 6.3.4; command was introduced.
Related Commands
show 802.1x captive-portal
configuration
MIB Objects
alaDot1xCportalConfig
alaDot1xCPortalIpAddress
OmniSwitch CLI Reference Guide
The IP address for the Captive Portal login page. This IP address must
use the following octet values: 10.x.0.1, where "x" is used to specify a
new subnet value.
Displays the global Captive Portal configuration for the switch.
June 2012 page 35-31