Show Saa Statistics - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show saa statistics

Display SAA statistics.
show saa [string] statistics [aggregate | history]
Syntax Definitions
string
aggregate
history
Defaults
By default, statistics are displayed for all SAAs and only for the most recent SAA test run.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
If the aggregate parameter is specified, then only the aggregate results are displayed.
•
If the history parameter is specified, then only the history results are displayed.
•
Since results are only kept for the last five iterations, using the history option displays only the last five
iterations.
•
Use the string parameter to display statistics for a specific SAA.
•
Statistics and history do not persist across a switch reboot or takeover.
Examples
-> show saa statistics
Legend: eth-lb = ethoam-loopback
: eth-dmm = ethoam-two-way-delay
Legend: - = Delay or jitter value not available
Latest Record:
SAA Type
ets Description
Sent Rcvd
------+----------+-------------------------+------+------+------+------+
------+------+----+----+------------
saa1 ip-ping
7 7 DEFAULT
saa2 ip-pin
7 7 DEFAULT
saa3 ip-ping
5 5 DEFAULT
saa4 eth-lb
8 0 DEFAULT
page 47-20
An existing SAA ID string.
Displays aggregate results for the specified SAA.
Displays a results history for the specified SAA.
Time of Last-Run
2009-09-05,20:18:34.0
2009-09-05,20:18:48.0
2009-09-05,20:19:15.0
2009-09-05,22:15:30.0
Service Assurance Agent Commands
RTT RTT RTT Jitter Jitter Jitter Pack-
Min Avg Max Min
970 1067 1432
1022 1180 1914
1016 1583 3794
- - -
OmniSwitch CLI Reference Guide
Avg Max
1 99 455
0 349 892
8 703 2767
- - -
June 2012