Ethernet OAM Commands
show ethoam cfmstack
Displays the contents of CFM Stack Managed Object, which determines the relationships among MEPs
and MIPs on a specific bridge port.
show ethoam cfmstack {port slot/port | virtual | linkagg agg_num}
Syntax Definitions
slot/port
agg_num
virtual
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
N/A
Examples
-> show ethoam cfmstack port 1/3
Up MHF Configured:
Vlan-id: 100,
Direction:
up,
MAC-Address: 00:D0:95:EC:84:B0,
Maintenance Association: alcatel-sales,
Maintenance Domain: esd.alcatel-lucent.com,
MD-level: 3
Down MHF Configured:
Vlan-id: 100,
Direction: down,
MAC-Address: 00:D0:95:F6:33:DA,
Maintenance Association: alcatel-sales,
Maintenance Domain: esd.alcatel-lucent.com,
MD-level: 3
-> show ethoam cfmstack port virtual
MEP-Id 32 - Vlan 30:
Direction: up,
MAC-Address: 00:E0:B1:A5:F2:34,
Maintenance Association: MA4,
Maintenance Domain: MD4,
MD-level: 4
OmniSwitch CLI Reference Guide
Slot and port number for which the contents of the configured MEP or
MIP will be displayed.
The aggregate ID for which the contents of the configured MEP or MIP
will be displayed.
Virtual port.
June 2012
page 45-65