Show Ethernet-Service Sap-Profile - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

VLAN Stacking Commands

show ethernet-service sap-profile

Displays the profile attribute configuration for VLAN Stacking Service Access Point (SAP) profiles.
show ethernet-service sap-profile sap-profile-name
Syntax Definitions
sap-profile-name
Defaults
By default, all SAP profiles are displayed if a SAP profile name is not specified with this command.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Specify a SAP profile name to display attributes for a single SAP profile.
•
Egress bandwidth can be configured only for SVLANs and not for IPMVLANs.
Examples
-> show ethernet-service sap-profile
Profile Name
-------------------+-----------+-----------+-----------+----------+-------+
audiosap
default-sap-profile
sap-video1
sap-conf-video2
-> show ethernet-service sap-profile sap-video1
Profile Name
-------------------+-----------+-----------+-----------+----------+-------+
sap-video1
output definitions
Profile Name
Ingr/Egr Bw
OmniSwitch CLI Reference Guide
Alphanumeric string of up to 32 characters. Use quotes around string if
the profile name contains multiple words with spaces between them
(e.g., "Alcatel-Lucent Engineering").
Ingr/Egr Ingr Bw
Bw Sharing
0/10 Disable
0/0 Enable
0/0 NA
10/20 Enable
Ingr/Egr Ingr Bw
Bw Sharing
0/0 NA
The name of the SAP profile.
The maximum amount of ingress-bandwidth (1=1,000,000 mbps) and
egress-bandwidth ( 0-9999) allowed for SAP ports.
June 2012
Inner Tag Priority
Option Mapping
Preserve fixed
Preserve fixed
Preserve in-out
Preserve NA
Inner Tag Priority
Option Mapping
Preserve in-out
Priority
Value
0
0
P
NA
Priority
Value
P
page 44-47