Show Port Mapping Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show port mapping status

Displays the status of one or more port mapping sessions.
show port mapping [port_mapping_sessionid] status
Syntax definitions
port_mapping_sessionid
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
If you do not specify the port mapping session ID, then the status of all the port mapping sessions will be
displayed.
Examples
-> show port mapping status
SessionID
------------+-----------------+--------------+-----------------+------------
1
2
3
4
7
8
output definitions
SessionID
Direction
Status
Unknown unicast
DPA Status
Release History
Release 6.1.2; command was introduced.
Release 6.3.4; unknown unicast field added.
Release 6.4.3; DPA Status field added
page 39-12
The port mapping session ID. Valid range is 1 to 8.
Direction Status
uni enable
uni enable
bi disable
bi enable
bi disable
bi disable
Displays the port mapping session ID.
Displays the direction of a port mapping session.
Displays the status of a port mapping session.
Displays the status of unknown unicast flooding
Displays the status of Dynamic Proxy ARP.
Port Mapping Commands
Unknown Unicast DPA Status
flood
drop
drop
flood
flood
flood
OmniSwitch CLI Reference Guide
disable
enable
disable
disable
enable
enable
June 2012