Saa - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

saa

Configures a Service Assurance Agent (SAA).
saa string [descr description] [interval interval]
no saa string
Syntax Definitions
string
description
interval
Defaults
parameter
description
interval
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of this command to remove an SAA from the switch configuration. Note that the SAA
must be stopped before it can be deleted.
•
The desc and interval parameters are optional. If these values are specified, the SAA is created with
those values. If these values are not specified, the SAA is created with the default values.
•
If the desc and/or interval parameters are specified for an existing SAA, then the values of the exist-
ing parameters are updated with those specified.
•
If the session time interval is changed for an SAA that is already running and active, the interval value
is immediately updated in the database but is not applied to the SAA until after the next iteration.
•
If none of the optional parameters are specified and the given SAA already exists, the CLI will return
an error message, as duplicate entries are not allowed.
•
A maximum of 50 SAAs is recommended if the same interval value is configured (for example, the
default of 10 minutes) for all the SAAs. If more than 50 are configured with the same interval value
and all of them are started together, then the SAAs may not be scheduled exactly after the specified
time interval. In this scenario, each SAA is scheduled only after all the other SAAs that are ahead of it
in the scheduler. If the SAAs are configured with random interval values (values that are not multiples
of other SAA values), then configuring more than 50 is allowed.
page 47-2
SAA ID string up to 32 characters. Use quotes around string if SAA ID
contains multiple words with spaces between them (e.g. "SAA 10").
Text string up to 32 characters. Use quotes around string if description
contains multiple words with spaces between them (e.g. "Alcatel-Lucent
Marketing SAA").
The amount of time, in minutes, between two iterations of the SAA test.
Valid range is from 10 to 1500.
default
DEFAULT
150
Service Assurance Agent Commands
OmniSwitch CLI Reference Guide June 2012