Aaa Accounting Vlan - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

aaa accounting vlan

Specifies a server or servers to be used for accounting with Authenticated VLANs. Accounting servers
keep track of network resources (time, packets, bytes, etc.) and user activity.
aaa accounting vlan [vlan_id] server1 [server2...] [local]
no accounting vlan [vlan_id]
Syntax Definitions
vlan_id
server1
server2...
local
Defaults
Accounting is disabled by default.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of the command to disable accounting for Authenticated VLANs.
•
Up to 4 accounting servers (total) may be specified. At least one server is required. Each server name
should be separated by a space.
•
The servers may be RADIUS, TACACS+, LDAP servers, and/or the local Switch Logging facility.
page 36-36
Required only for multiple mode. The VLAN associated with the
accounting server or chain of accounting servers.
The name of the RADIUS, TACACS+, or LDAP server used for
accounting with Authenticated VLANs. At least one server is required.
RADIUS and LDAP server names are set up through the
server, aaa tacacs+-server, and
local accounting feature will be used as the only accounting mecha-
nism, specify local for server1.
The names of backup servers. Up to 3 backups may be specified (includ-
ing local); include a space between each server name. Backups are only
used if server1 becomes unavailable. They are polled in the order they
are listed in this command. The first available server becomes the
accounting server.
Local accounting is done through the Switch Logging feature in the
switch. See Chapter 51, "Switch Logging Commands,"
about Switch Logging commands.
aaa ldap-server commands. If the
OmniSwitch CLI Reference Guide
AAA Commands
aaa radius-
for information
June 2012