Show Ethoam Default-Domain Configuration - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet OAM Commands

show ethoam default-domain configuration

Displays the level, MHF, and ID permission values for the default domain.
show ethoam default-domain configuration
Syntax Definitions
N/A
Defaults
N/A.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
N/A
Examples
-> show ethoam default-domain configuration
Level : 3,
MHF-Creation : mhfdefault,
ID-Permission : sendIdnone
output definitions
Level
MHF-creation
ID-Permission
Release History
Release 6.4.3; command was introduced.
Related Commands
show ethoam default-domain
OmniSwitch CLI Reference Guide
The level assigned to the default domain. Configured through the
ethoam default-domain level
Indicates the MHF value for a VLAN that is part of the default MD
Options include none, explicit, or default. Configured through the
ethoam default-domain mhf
The ID permision of the default domain. Configured through the
ethoam default-domain id-permission
Displays the primary VLAN configuration for the default domain.
June 2012
command.
command.
command.
page 45-59