ethoam default-domain id-permission
Configures the effective ID permission value for all default domain entries with the ID permission value
set to defer.
ethoam default-domain id-permission {none | chassisid}
no ethoam default-domain
Syntax Definitions
none
chassisid
Defaults
Default value is none.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
N/A
Examples
-> ethoam default-domain id-permission chassisid
Release History
Release 6.4.3; command was introduced.
Related Commands
show ethoam default-domain
configuration
MIB Objects
dot1agCfmDefaultMdDefIdPermission
page 45-22
Sender ID TLV is not to be sent.
Chassis ID Length, Chassis ID Subtype and Chassis ID TLV are to be
present.
Displays the default domain configuration.
Ethernet OAM Commands
OmniSwitch CLI Reference Guide
June 2012