Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3323

CMM Commands
•
If a reload command is issued, and another reload is currently scheduled, a message appears informing
the user of the next reload time and asks for confirmation to change to the new reload time.
•
If the switch has a redundant CMM and the primary CMM is rebooted, the switch will fail over to the
secondary CMM. For more information on CMM failover, see "Managing CMM Directories" in the
OmniSwitch AOS Release 6 Switch Management Guide.
•
If the switch is part of a stack with three or more switches, the next switch in "idle" mode becomes the
secondary CMM, and the original primary CMM becomes "idle." For more information on stacks, see
the appropriate Hardware Users Guide.The cancel keyword stops a pending reboot.
•
This command can also be used on the secondary CMM.
Examples
-> reload
-> reload primary
-> reload primary with-fabric
-> reload primary in 15:25
-> reload primary at 15:25 august 10
-> reload primary at 15:25 10 august
Release History
Release 6.1; command was introduced.
Related Commands
reload working
MIB Objects
chasEntPhysicalTable
csEntPhysicalIndex
chasEntPhysAdminStatus
chasControlRedundantTable
chasControlDelayedRebootTimer
OmniSwitch CLI Reference Guide
Immediate primary CMM reboot to the working software configuration
without secondary CMM takeover.
June 2012 page 53-3