Show Aaa Classification-Rule - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show aaa classification-rule

Displays the User Network Profile (UNP) mobile classification rule configuration for the switch.
show aaa classification-rule {mac-rule | mac-range-rule | ip-net-rule}
Syntax Definitions
mac-rule
mac-range-rule
ip-net-rule
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855
Usage Guidelines
•
Specifying a rule type parameter (mac-rule, mac-range-rule, ip-net-rule) is required with this
command.
•
UNP mobile rules take precedence over VLAN mobile rules.
Examples
-> show aaa classification-rule mac-rule
MAC Address
------------------+--------------------------
00:1a:a0:b1:fa:e5
00:b0:d0:2a:0e:2e
00:b0:d0:2a:11:60
output definitions
MAC Address
User Network Profile Name
-> show aaa classification-rule mac-range-rule
Low MAC Address
------------------+-----------------+-------------------------
00:1a:a0:b1:fa:10
00:b0:d0:2a:0e:2e
00:b0:d0:2a:11:60
page 36-142
Displays MAC address rules.
Displays MAC address range rules.
Displays IP network address rules.
User Network Profile Name
guest_user
acct_user
engr_user
The source MAC address of the host device to which the UNP is
applied.
The name of the UNP applied to the host device.
High MAC Address User Network Profile Name
00:1a:0a:b1:fa:20 guest_user
00:b0:d0:2a:0e:3a acct_user
00:b0:d0:2a:11:70 engr_user
OmniSwitch CLI Reference Guide
AAA Commands
June 2012