Show Ethoam Remote-Endpoint Domain - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet OAM Commands

show ethoam remote-endpoint domain

Displays the information of all remote MEPs learned as a part of the CCM message exchange.
show ethoam remote-endpoint domain d_name association a_name end-point s-mepid [remote-mep r-
mepid]
Syntax Definitions
d_name
a_name
s-mepid
r-mepid
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
N/A
Examples
-> show ethoam remote-endpoint domain MD association MA endpoint 10
Legends: PortStatusTlv: 1 = psBlocked, 2 = psUp, 0 = psNoTlv
InterfaceStatusTlv: 1 = ifUp, 2 = ifDown, 4 = ifUnknown, 0=ifNoTlv
RMEP-ID RMEP
Status
------+---------+------+-----------------+---+----+-----+--------+------
20 RMEP_OK
30 RMEP_OK
output definitions
MEP-ID
RMEP Status
OkFailed Time
MacAddress
OmniSwitch CLI Reference Guide
Specifies the domain name.
Specifies the name of the Ethernet OAM Association.
Specifies the MEP of a specific MA. The valid range is 1–8191.
The remote MEP. The valid range is 1–8191.
OkFailed Mac Address
Time
634600 00:E0:B1:6E:41:65
334600 00:E0:B1:6E:41:64
Indicates the Maintenance End Point.
The operational state of the remote MEP Remote State
machines for this MEP, which can be RMEP_IDLE, RMEP_START,
RMEP_FAILED, or RMEP_OK.
The time (SysUpTime) when the Remote MEP state machine last
entered either the RMEP_FAILED or RMEP_OK.
The MAC address of the remote MEP.
June 2012
port I/f RDI Ch-id
Tlv Tlv value Subtype
2 1 false LCL-ASND DUT-1
2 1 false LCL-ASND DUT-2
Ch-id
page 45-63