Show Ethernet-Service Uni-Profile - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show ethernet-service uni-profile

Displays the profile attribute configuration for VLAN Stacking User Network Interface (UNI) profiles.
show ethernet-service uni-profile [uni-profile-name]
Syntax Definitions
uni-profile-name
Defaults
By default, all UNI profiles are displayed if a UNI profile name is not specified with this command.
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
•
Specify a UNI profile name to display attributes for a single UNI profile.
Examples
-> show ethernet-service uni-profile
Profile Name
+----------------+-------+--------+---------+----------+--------+---------+
uprofile-video1
output definitions
Profile Name
Stp
802.1x
802.3ad
802.1AB
GVRP
AMAP
Release History
Release 6.6.1; command was introduced.
page 24-44
Alphanumeric string of up to 32 characters. Use quotes around string if
the profile name contains multiple words with spaces between them
(e.g., "Alcatel-Lucent Engineering").
Stp 802.1x 802.3ad
tunnel drop peer
The name of the UNI profile.
Indicates how Spanning Tree traffic control packets are processed.
Indicates how IEEE 802.1x control packets are processed.
Indicates how IEEE 802.3ad control packets are processed.
Indicates how IEEE 802.1AB control packets are processed.
Indicates how GARP VLAN Registration Protocol packets are pro-
cessed.
Indicates how Alcatel-Lucent Mapping adjacency Protocol packets are
processed.
VLAN Stacking Commands
802.1AB GVRP
drop tunnel
OmniSwitch CLI Reference Guide
AMAP
drop
November 2009