Show Router Ldp Peer - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show router ldp peer

Displays configuration information for LDP peers.
show router ldp peer [ip-address] [detail]
Syntax Definitions
ip-address
detail
Defaults
By default, the configuration for all LDP peers is displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
Use the ip-address parameter to display information for a specific LDP peer.
•
Use the detail parameter to display additional information and statistics for the specified LDP peers.
Examples
->show router ldp peer
LDP Peers
Peer
-----------------+----+----+-------+-------+-------+--------+---------+--------
10.11.0.6
20.1.2.3
30.1.2.3
No. of Peers: 3
->show router ldp peer detail
LDP Peers (Detail)
Peer 10.11.0.66
Admin State:
Hold Time:
Keepalive Timeout:
Passive Mode:
Active Adjacencies:
Tunneling:
Lsp Name:
page 48-70
The IP address of an LDP peer.
Displays detailed information for the specified peers.
Adm Opr Hello Hold
Factor Time
Up Up 3 45
Up Up 3 45
Up Up 3 45
Up,
45,
40,
Disabled,
1,
Disabled,
None
KA KA Passive
Factor Timeout Mode
4 40 Disabled
4 40 Disabled
4 40 Disabled
Oper State:
Hello Factor:
Keepalive Factor:
Last Modified:
d: Yes,
OmniSwitch CLI Reference Guide
MPLS LDP Commands
Auto
Created
Yes
Yes
Yes
Up,
3,
3,
05/26/2009 23:14:27,
June 2012