Chapter 36 Aaa Commands - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

This chapter includes descriptions for authentication, authorization, and accounting (AAA) commands.
The commands are used for configuring the type of authentication as well as the AAA servers and the
local user database on the switch.
•
Authenticated VLANs. Authenticates users through the switch into particular VLANs. User
information is stored on an external RADIUS, TACACS+, or LDAP server.
•
Authenticated Switch Access. Authenticates users into the switch to manage the switch. User
information is stored on a RADIUS, TACACS+, LDAP, or ACE/Server; or information may be stored
locally in the switch user database.
•
Local user database. User information may be configured for Authenticated Switch Access. For
functional management access, users may be allowed to access specific command families or domains.
Alternately, users may be configured with a profile that specifies access to particular ports or VLANs.
MIB information for the AAA commands is as follows:
Filename: alcatelIND1AAA.mib
Module: ALCATEL-IND1-AAA-MIB
Filename: alcatelIND1Dot1x.mib
Module: ALCATEL-IND1-DOT1X-MIB
A summary of the available commands is listed here:
Authentication servers
Authenticated VLANs
OmniSwitch CLI Reference Guide
36 AAA Commands
aaa radius-server
aaa radius agent preferred
aaa tacacs+-server
aaa ldap-server
aaa ace-server clear
show aaa server
aaa authentication vlan single-mode
aaa authentication vlan multiple-mode
aaa vlan no
aaa accounting mac
aaa avlan dns
aaa avlan default dhcp
aaa accounting command
avlan port-bound
avlan auth-ip
aaa avlan http language
show aaa authentication vlan
show aaa accounting vlan
show avlan user
show aaa avlan config
show aaa avlan auth-ip
June 2012 page 36-1