port mapping
Configures the direction of a port mapping session.
port mapping port_mapping_sessionid {unidirectional | bidirectional}
Syntax Definitions
port_mapping_sessionid
unidirectional
bidirectional
Defaults
parameter
unidirectional | bidirectional
Platform Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
In the bidirectional mode, the network ports of a session cannot communicate with each other. Also,
the network ports of that session cannot be a part of a network port set of another session.
•
In the unidirectional mode, the network ports of a session can communicate with each other. Also, the
network ports of that session can be part of a network port set of another session, which is also in the
unidirectional mode.
•
To change the direction of an active session with network ports, delete the network ports of the session,
change the direction, and recreate the network ports.
Examples
-> port mapping 5 unidirectional
-> port mapping 6 bidirectional
Release History
Release 6.1.2; command was introduced.
page 39-6
The port mapping session ID. Valid range is 1 to 8.
Specifies unidirectional port mapping.
Specifies bidirectional port mapping.
default
bidirectional
Port Mapping Commands
OmniSwitch CLI Reference Guide
June 2012