show service id all
Displays detailed configuration information about the specified service ID, including the SDP and SAP
configuration associated with the service.
show service id service-id all
Syntax Definitions
service-id
Defaults
N/A.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
The service ID is a unique number that identifies a specific VPLS. All information associated with the
service ID is displayed.
Examples
-> show service id 100 all
Service Detailed Information
Service Id:
Service Type:
Customer Id:
Last Status Change:
Last Mgmt Change:
Admin State:
MTU:
SAP Count:
Snd Flush on Fail:
Propagate MacFlush:
Service Destination Points(SDPs)
Sdp Id 10:100
SDP Id:
VC Type:
Admin Path MTU:
Far End:
Admin State:
Acct. Pol:
Ingress Label:
Ing mac Fltr:
Ing ip Fltr:
Admin ControlWord:
Last Status Change:
Last Mgmt Change:
page 50-84
An existing VPLS ID number.
100,
VPLS,
1,
01/19/2009 13:09:36,
01/19/2009 13:09:10,
Up,
1514,
5,
Disabled,
N/A
-(10.11.0.6)
10:100,
Ether,
1514,
10.11.0.6,
Up,
N/A,
131069,
n/a,
n/a,
N/A,
01/19/2009 13:10:48,
01/19/2009 13:09:10,
Virtual Private LAN Service (VPLS) Commands
Vpn Id:
Oper State:
Def. Mesh VC Id:
SDP Bind Count:
Host Conn Verify:
Type:
VC Tag:
Oper Path MTU:
Delivery:
Oper State:
Collect Stats:
Egress Label:
Egr mac Fltr:
Egr ip Fltr:
Oper ControlWord:
Signaling:
Force Vlan-Vc: Disabled,
OmniSwitch CLI Reference Guide
N/A,
Up,
100,
1,
N/A,
Mesh,
n/a,
1514,
LDP,
Up,
LDP,
131070,
n/a,
n/a,
False,
TLDP,
June 2012