Ethernet-Service Uni-Profile - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ethernet-service uni-profile

Creates a User Network Interface (UNI) profile that is used to specify how to process control packets
ingressing on UNI ports.
ethernet-service uni-profile uni-profile-name [tunnel-mac mac-address] [l2-protocol {vtp | vlan |
uplink | udld | stp | pvst | pagp | oam | mvrp | lacpmarker | gvrp | dtp | cdp | amap | 802.3ad | 802.1x |
802.1ab {peer | discard | tunnel | mac-tunnel}}
no ethernet-service uni-profile uni-profile-name
Syntax Definitions
uni-profile-name
mac-address
vtp
vlan
uplink
udld
stp
pvst
pagp
oam
mvrp
lacpmarker
gvrp
dtp
cdp
amap
802.3ad
802.1x
802.1ab
peer
page 44-24
Alphanumeric string of up to 32 characters. Use quotes around string if
the profile name contains multiple words with spaces between them
(e.g., "Alcatel-Lucent Engineering").
The mac address to be used when configuring a protocol for tunnel-mac.
Cisco's VTP Protocol.
Cisco's VLAN Protocol.
Cisco's Uplink Fast Protocol
Cisco's UDLD Protocol.
Spanning Tree BPDU.
Cisco's PVST Protocol.
Cisco's PAGP Protocol.
OAM Protocol.
MVRP Protocol.
LACP Marker Protocol.
Specifies how GARP VLAN Registration Protocol packets will be
processed on the UNI port.
Cisco's DTP Protocol.
Cisco's DTP Protocol.
Specifies how Alcatel Management Adjacency Protocol packets will be
processed on the UNI port.
Specifies how 802.3ad and 802.3ah control frames will be processed on
the UNI port.
Specifies how 802.1x control frames will be processed on the UNI port.
Specifies how 802.1ab control frames will be processed on the UNI
port.
Allows the UNI port to participate in the specified protocol.
VLAN Stacking Commands
OmniSwitch CLI Reference Guide June 2012