Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3275

Virtual Private LAN Service (VPLS) Commands
-> show service sap-using sap linkagg 5:400
Service Access Points Using Port 0/5:400
PortId
-------------------+----------+----+----+-------+---
0/5:400
Number of SAPs : 1
output definitions
PortId
Service Id
Adm
Oper
Trusted
Pri
Release History
Release 6.4.2; command was introduced.
Related Commands
show service id sap
show service port
MIB Objects
OmniSwitch CLI Reference Guide
SvcId Adm Opr
200 Up Up Yes
The access port number and encapsulation type for the SAP. Config-
ured through the
The service ID associated with the SAP. Configured through the
configure service vpls create
the configure service vpls sap create
The administrative state of this SAP (Up or Down). Configured
through the configure service vpls sap shutdown
The operational state of this SAP (Up or Down).
The trusted status (Yes or No) for traffic mapped to this SAP. If Yes is
displayed, the internal priority value for ingress traffic is used. If No is
displayed, the value displayed in the Pri field is used.
The priority value assigned to the traffic mapped to this SAP. This
value is only applied if the Trusted status for the SAP is set to Yes.
Displays the detailed configuration for the specified service ID, includ-
ing all SDPs and SAPs associated with the service.
Displays the access (customer-facing) port configuration for the router.
June 2012
Trusted Pri
0
configure service port mode access
command and bound to the SAP using
command.
command.
command.
page 50-101