Show Router Mpls Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show router mpls status

Displays the MPLS status.
show router mpls status
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
This command administrative and operational information for the MPLS instance on the router.
Examples
-> show router mpls status
MPLS Status
Admin Status:
Oper Down Reason:
LSP Counts
Static LSPs
Dynamic LSPs
Detour LSPs
output definitions
Admin Status
Oper Status
Oper Down Reason
LSP Counts
Originate
Transit
Terminate
Release History
Release 6.4.2; command was introduced.
page 49-36
Up,
N/A
Originate
0
0
0
The administrative state of the LSP peer (Up or Down).
The operational state of the LSP peer (Up or Down).
Reason for operational state - Down.
Displays the total number of static LSPs.
Displays originate information for static LSPs.
Displays transit information for static LSPs.
Displays endpoint information for static LSPs.
Oper Status:
Transit Terminate
4
0
0
OmniSwitch CLI Reference Guide
MPLS Static LSP and FRR Commands
Up,
0
0
0
June 2012