Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3132

output definitions
Peer LDP Id
Adj Type
State
Msg Sent
Msg Rcvd
Up Time
Release History
Release 6.4.2; command was introduced.
Related Commands
show router ldp status
show router ldp parameters
show router ldp interface
MIB Objects
page 48-76
The IP address of the LDP peer.
The type of adjacency (Link—adjacency is the result of a Link Hello;
Targeted—the adjacency is the result of a Targeted Hello).
The state of the adjacency (Established or Trying).
The number of messages sent for this adjacency.
The number of messages received for this adjacency.
The amount of time the adjacency has been enabled.
Displays status information and statistics for the LDP instance on the
local router.
Displays the LDP graceful restart, interface, and targeted session param-
eter values for the local router.
Displays the LDP interface configuration for the local router.
MPLS LDP Commands
OmniSwitch CLI Reference Guide June 2012