Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3235

Virtual Private LAN Service (VPLS) Commands
dot1q encapsulation, multiple SAPs (services) are allowed on the one port (see
encap-type).
•
If the SAP is configured to use the null encapsulation type, the access port encapsulation mode deter-
mines if both tagged and untagged traffic or only untagged traffic is allowed on the SAP. For example,
if the access port is set to null encapsulation, both tagged and untagged traffic is mapped to the SAP. If
the access port is set to dot1q encapsulation, then only tagged traffic is mapped to the SAP.
Examples
-> configure service vpls 10 sap 1/2
-> configure service vpls 11 sap 1/2:all
-> configure service vpls 12 sap 1/2:10
-> configure service vpls 13 linkagg 20
-> configure service vpls 14 linkagg 20:all
-> configure service vpla 15 linkagg 20:100
-> configure service vpls 10 no sap 1/2
-> configure service vpls 13 no linkagg 20
Release History
Release 6.4.2; command was introduced.
Related Commands
configure service vpls sap description
configure service vpls sap trusted
configure service vpls sap shutdown
configure service vpls sap static-mac
show service id sap
show service sap-using
MIB Objects
sapBaseInfoTable
sapPortId
sapEncapValue
svcBaseInfoTable
svcId
OmniSwitch CLI Reference Guide
Configures a description for the specified SAP ID.
Configures the trust mode for the specified SAP ID.
Configures the administrative status for the specified SAP ID.
Configures a static MAC address entry in the forwarding data-
base for the service that is associated with the specified SAP ID.
Displays configuration information about the SAPs associated
with the specified service.
Displays the SAP configuration for the local router.
June 2012
configure service port
page 50-61