Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3243

Virtual Private LAN Service (VPLS) Commands
•
Static MACs associated with a SAP are classified as local MACs. A local MAC is used by the associ-
ated VPLS so that MAC addresses are not learned on the edge device.
•
A MAC address can participate in only one static MAC address entry (local or remote) for a specific
VPLS.
•
Static MAC addresses configured on one edge device are not propagated to other edge devices associ-
ated with the same VPLS instance. Each edge device has an independent forwarding database for the
associated VPLS.
Examples
-> configure service vpls 100 sap 1/2:10 static-mac 00:00:da:3e:44:01
-> configure service vpls 101 sap linkagg 20:all static-mac 00:01:95:44:2a:10
-> configure service vpls 100 sap 1/2:10 no static-mac 00:00:da:3e:44:01
-> configure service vpls 101 sap linkagg 20:all no static-mac 00:01:95:44:2a:10
Release History
Release 6.4.2; command was introduced.
Related Commands
configure service vpls sap create
configure service vpls sap description
configure service vpls sap trusted
configure service vpls sap shutdown
show service id sap
show service sap-using
MIB Objects
tlsFdbInfoTable
tlsFdbMacAddr
tlsFdbType
tlsFdbLocale
sapBaseInfoTable
sapPortId
sapEncapValue
svcBaseInfoTable
svcId
OmniSwitch CLI Reference Guide
Configures a SAP by associating a SAP ID with a Virtual Private
LAN Service (VPLS).
Configures a description for the specified SAP ID.
Configures the trust mode for the specified SAP ID.
Configures the administrative status for the specified SAP ID.
Displays configuration information about the Service Access
Points (SAPs) associated with the specified service.
Displays the SAP configuration for the local router.
June 2012 page 50-69