Show Policy Service Group - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

QoS Policy Commands

show policy service group

Displays information about pending and applied policy service groups.
show [applied] policy service group [service_group]
Syntax Definitions
applied
service_group
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Information for all policy service groups displays unless service_group is specified.
•
The display may include any of the following characters:
character definition
+ Indicates a new policy service group.
- Indicates the policy service group is pending deletion.
# Indicates that the policy service group differs between
the pending/applied service groups.
Examples
-> show policy service group
Group Name:
serv_group1
serv_group2
OmniSwitch CLI Reference Guide
Indicates that only service groups that have been applied should be
displayed.
The name of the service group for which you want to display informa-
tion; or a wildcard sequence of characters for displaying information
about service groups with similar names. Use an asterisk (*) to indicate
a wildcard character.
From Entries
cli telnet
ftp
cli telnet
June 2012 page 33-207