Virtual Private LAN Service (VPLS) Commands
configure service customer phone
Configures telephone number information for the specified customer account.
configure service customer customer-id phone phone-info
configure service customer customer-id no phone
Syntax Definitions
customer-id
phone-info
Defaults
By default, telephone information is not added when a customer account is created.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
Use the no form of this command to remove the telephone information from the specified customer
account ID.
•
Printable, 7-bit ASCII characters are allowed in the description text string.
Examples
-> configure service customer 10 phone "888-444-1234"
-> configure service customer 10 no phone
Release History
Release 6.4.2; command was introduced.
OmniSwitch CLI Reference Guide
An existing customer ID number.
An ASCII text string up to 80 characters in length. Enclose special char-
acters, such as #, $, or spaces, in double quotation marks (for example
"800-444-1234").
June 2012
page 50-7