Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3125

MPLS LDP Commands
output definitions
Hello Factor
Passive Mode
Targeted Sessions
Release History
Release 6.4.2; command was introduced.
Related Commands
show router ldp interface
show router ldp discovery
interface
MIB Objects
OmniSwitch CLI Reference Guide
The Hello factor value that is divided into the Hold Time value to
determine the interval at which Hello messages are sent from this inter-
face. Configured through the
ters hello command.
Whether or not passive mode is active (True or False). When passive
mode is active, LDP responds only when a connect request is received
from a peer and does not actively try to connect with peers. When this
mode is not active, LDP actively tries to connect to peers.
The status of targeted sessions (Enabled or Disabled).
Displays the LDP interface configuration for the local router.
Displays the discovery status of the LDP Hello adjacencies associated
with the specified LDP interface.
June 2012
configure router ldp interface-parame-
page 48-69