Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2441

QoS Policy Commands
output definitions
Condition Name
From
Scr
Dest
Release History
Release 6.1; command was introduced.
Related Commands
policy condition
MIB Objects
alaQoSConditionTable
alaQoSConditionName
alaQoSConditionSource
alaQoSConditionSourceSlot
alaQoSConditionSourcePort
alaQoSConditionSourcePortGroup
alaQoSConditionDestinationSlot
alaQoSConditionDestinationPort
alaQoSConditionDestinationPortGroup
alaQoSConditionSourceInterfaceType
alaQoSConditionDestinationInterfaceType
alaQoSConditionSourceMacAddr
alaQoSConditionSourceMacMask
alaQoSConditionSourceMacGroup
alaQoSConditionDestinationMacAddr
alaQoSConditionDestinationMacMask
alaQoSConditionDestinationMacGroup
alaQoSConditionSourceVlan
alaQoSConditionDestinationVlan
alaQoSCondition8021p
alaQoSConditionSourceIpAddr
alaQoSConditionSourceIpMask
alaQoSConditionSourceNetworkGroup
alaQoSConditionDestinationIpAddr
alaQoSConditionDestinationIpMask
alaQoSConditionDestinationNetworkGroup
alaQoSConditionMulticastIpAddr
alaQoSConditionMulticastIpMask
alaQoSConditionMulticastNetworkGroup
alaQoSConditionTos
alaQoSConditionDscp
alaQoSConditionTcpFlags
OmniSwitch CLI Reference Guide
The name of the condition, configured through the policy condition
command.
The origin of the condition: cli indicates that the entry was configured
on the switch; ldap indicates the entry was configured through Policy-
View.
The source address associated with the condition.
The destination address associated with the condition.
Creates a policy condition. The condition determines what parameters
the switch uses to classify incoming flows.
June 2012 page 33-221