Ethernet-Service Service-Name - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ethernet-service service-name

Creates a VLAN Stacking service and associates the service with an SVLAN or an IP Multicast VLAN
(IPMV). The SVLAN or IPMV specified is the VLAN that will transport traffic for the service.
ethernet-service service-name service-name {svlan | ipmvlan} svid
no ethernet-service service-name service-name {svlan | ipmvlan} svid
Syntax Definitions
service-name
svid
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of this command to remove a VLAN Stacking service. Note that when a service is
removed, the SVLAN or IPMV association with that service is also removed.
•
If the VLAN Stacking service is associated with a Service Access Point (SAP) remove the SAP associ-
ations before attempting to remove the service.
•
Each VLAN Stacking service is associated with one SVLAN or IPMV. Specifying an additional
VLAN ID for an existing service is not allowed.
Examples
-> ethernet-service service-name Marketing svlan 10
-> ethernet-service service-name Finance ipmvlan 20
-> no ethernet-service service-name Marketing
Release History
Release 6.3.1; command was introduced.
page 44-6
The name of the VLAN Stacking service; an alphanumeric string of up
to 32 characters. Use quotes around string if the VLAN name contains
multiple words with spaces between them (e.g., "Alcatel-Lucent Engi-
neering").
The VLAN ID number that identifies an existing SVLAN or IPMV to
associate with the VLAN Stacking service (2–4094).
VLAN Stacking Commands
OmniSwitch CLI Reference Guide June 2012