Show Module - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show module

Displays the basic information for either a specified module or all modules installed in a standalone switch
chassis or a stack. Modules include switches performing the primary and secondary CMM roles and
Network Interface (NI) in a stack.
show module [number]
Syntax Definitions
number
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E.
Usage Guidelines
This command may be used when logged into the switch that performs either the primary or secondary
CMM role in a stack.
Examples
-> show module
Slot Part-Number
-------+--------------+------------+---+-----------+----------------------------
CMM-1 902271-10
NI-1 902271-10
output definitions
Slot
Part-Number
Serial #
Rev
Date
Model Name
page 54-42
The slot number for a specific module installed in a standalone switch
chassis or the switch number within a stack. If no slot number is speci-
fied, information for all modules is displayed.
HW Mfg
Serial # Rev Date
E23L9059 002 JUN 08 2004
E23L9059 002 JUN 08 2004
The chassis slot position of the module. For detailed slot numbering
information, refer to the "Chassis and Power Supplies" chapter of the
Hardware User Manual. Refer to
on CMM location callouts.
The Alcatel-Lucent part number for the module.
The Alcatel-Lucent serial number for the module.
The hardware revision level for the module.
The date the module was manufactured.
The descriptive name for the module. For example, OS9-GNI-U24
indicates a twenty four-port Gigabit Ethernet module.
Chassis Management and Monitoring Commands
Model Name
OS6850
OS6850
page 54-36 for additional information
OmniSwitch CLI Reference Guide June 2012