Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2450

Examples
-> show policy rule
Policy
r1
(L2/3):
r2
(L2/3):
+r3
(L2/3):
+r4
(L2/3):
-> show applied policy rule
Policy
r1
(L2/3):
r2
(L2/3):
output definitions
Policy
From
Prec
Enab
Act
Refl
Log
Trap
Save
page 33-230
From Prec Enab
cli 0 Yes
c1 -> a1
cli 0 Yes
c2 -> a2
cli 0 Yes
c2 -> a3
cli 0 Yes
c1 -> a1
From Prec Enab
cli 0 Yes
c1 -> a1
cli 0 Yes
c2 -> a2
The name of the policy rule, configured through the
mand. A plus sign (+) preceding a policy rule name indicates that the
policy rule has been modified or has been created since the last qos
apply.
Where the rule originated.
The precedence of the rule. Precedence determines the order in which
the switch will apply rules. Configured through the
Whether or not the rule is enabled.
Whether or not the rule is enforceable by the switch (e.g., qos is
enabled, rule is valid and enabled, validity period is active).
Whether the rule is reflexive or not.
Whether or not the switch will log messages about specific flows com-
ing into the switch that match this policy rule. Configured through the
policy rule command.
Whether or not traps are enabled for the rule. Configured through the
policy rule command. A trap is sent when a port is administratively
disabled through a port disable action or a UserPort shutdown function.
Whether the rule will be captured in an ASCII text file (using the
configuration snapshot
after the write memory command or
or saved after a reboot. Configured through the
QoS Policy Commands
Act Refl Log Trap Save Def
Yes No No Yes
Yes No No Yes
Yes No No Yes
Yes No No Yes
Act Refl Log Trap Save Def
Yes No No Yes
Yes No No Yes
command), saved to the working directory
reload issu command is entered,
policy rule
OmniSwitch CLI Reference Guide
Yes Yes
Yes Yes
Yes No
Yes No
Yes Yes
Yes Yes
policy rule com-
command.
June 2012