MPLS Static LSP and FRR Commands
show router mpls label
Displays the MPLS labels that are exchanged.
show router mpls label start-label [end-label [label-filter]]
Syntax Definitions
start-label
end-label
label-filter
Defaults
N/A
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Use the command parameters provided to display information for specific types of labels.
Examples
-> show router mpls label 500
MPLS Label 500
Label
---------------+-------------------+------------------
500
In-use labels in entire range
-> show router mpls label 32 80 static
MPLS Labels from 32 to 80 (Owner: STATIC)
Label
-------------------+-------------------+------------------------
In-use labels (Owner: STATIC) in specified range: 0
In-use labels (Owner: All) in specified range
In-use labels in entire range
OmniSwitch CLI Reference Guide
The label value assigned to the ingress router.
The label value assigned to the egress router.
The types of labels to display. The valid entries for this parameter are
in-use, bgp, ildp, mirror, rsvp, static, svcmgr, tldp, or vprn. Enter
one type per command.
Label Type
static-lsp
Label Type
June 2012
Label Owner
STATIC
: 8
Label Owner
: 0
: 9
page 49-27