46 Link Oam Commands - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

46 LINK OAM Commands

Ethernet in the First Mile (EFM), also known as LINK OAM, is a collection of protocols specified in
IEEE 802.3ah, defining Ethernet in the access networks that connects subscribers to their immediate
service provider. EFM, EFM-OAM and LINKOAM refers to IEEE 802.3ah standard.
LINK OAM (operation, administration, and maintenance) is a tool which monitors Layer-2 link status on
the network by sending OAM protocol data units (OAMPDUs) between the network devices. OAMPDUs
contain control and status information used to monitor, test and troubleshoot OAM-enabled links. By
enabling LINK OAM on switch ports, network administators can monitor the link-related issues on the
first mile. LINK OAM provides network administrators the ability to monitor link performance, remote
fault detection and remote loopback control.
Note. EFM (LINK OAM) does not include functions such as station management, bandwidth allocation or
provisioning functions.
MIB information for the EFM (LINK OAM) commands is as
Filename: alcatel-ind1-dot3-oam-mib.mib
Module: ALCATEL-IND1-DOT3-OAM-MIB
Filename: dot3-oam-mib.mib
Module: DOT3-OAM-MIB
A summary of the available commands is listed here:
Global Configuration
Commands
Port Status Commands
Port Event Notification
Commands
Timer Interval Commands
OmniSwitch CLI Reference Guide
efm-oam
efm-oam multiple-pdu-count
efm-oam errored-frame-seconds-summary
efm-oam errored-frame-period
efm-oam errored-frame
efm-oam port status
efm-oam port mode
efm-oam port propagate-events
efm-oam errored-frame
efm-oam errored-frame-period
efm-oam errored-frame-seconds-summary
efm-oam port keepalive-interval
efm-oam port hello-interval
June 2012 page 46-1