Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3149

MPLS Static LSP and FRR Commands
Related Commands
configure router mpls interface
configure router mpls interface
label-map
configure router mpls interface
label-map swap next-hop
configure router mpls interface
label-map pop
show router mpls interface
MIB Objects
mplsInSegmentTable
mplsInSegmentXCIndex
mplsXCTable
mplsXCAdminStatus
OmniSwitch CLI Reference Guide
Enables MPLS Protocol support on an IP interface.
Configures an incoming label number that the specified MPLS interface
will process.
Configures the outgoing label number that is swapped for the specified
incoming label number and the next-hop router IP address for the static
LSP.
Configures a pop (remove) label operation to identify the router as an
egress (endpoint) router for the static LSP.
Displays the MPLS interface configuration.
June 2012 page 49-13