Efm-Oam Multiple-Pdu-Count - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

LINK OAM Commands

efm-oam multiple-pdu-count

Configures the value of multiple PDU count. When multiple PDU count is set to a specific number in case
of any of the threshhold cross events, the same event notification PDU will be transmitted that many times
towards the peer.
efm-oam multiple-pdu-count count
Syntax Definitions
count
Defaults
By default, the PDU-count value is set to 3.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855.
Usage Guidelines
N/A
Examples
-> efm-oam multiple-pdu-count 5
Release History
Release 6.4.2; command was introduced.
Related Commands
show efm-oam configuration
show efm-oam port remote
detail
MIB Objects
alaDot3OamMultiplePduCount
OmniSwitch CLI Reference Guide
Specifies the number of PDUs that have to be sent in case of event-noti-
fication TLVs. The range is 1 to 10 PDUs.
Displays the global LINK OAM configuration.
Displays the configuration and details of the related parameters of
the remote port.
June 2012 page 46-23