Show Aaa Server - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

AAA Commands

show aaa server

Displays information about a particular AAA server or AAA servers.
show aaa server [server_name]
Syntax Definitions
server_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
OmniSwitch 9000E, 6855-U24X; VRF supported.
Usage Guidelines
•
If you do not include a server name in the syntax, information for all servers displays.
•
To display information about an ACE server, use ace as the server_name. Information for ACE is only
available if ACE is specified for Authenticated Switch Access through the aaa authentication
command.
Examples
-> show aaa server ldap2
Server name = ldap2
Server type= LDAP,
Host name 1= ors40535,
Retry number= 3,
Timeout (in sec)= 2,
Port= 389,
Domain name= manager,
Search base= c=us,
-> show aaa server rad1
Server name = rad1
Server type
IP Address 1
Retry number
Time out (sec)
Authentication port
Accounting port
VRF
OmniSwitch CLI Reference Guide
The server name, which is defined through the aaa radius-server or
aaa ldap-server commands or automatically set as ace for ACE
servers.
= RADIUS,
= 10.111.0.1,
= 3,
= 2,
= 1812,
= 1813,
= "Management-vrf"
June 2012 page 36-101