Aaa Certificate-Password - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

AAA Commands

aaa certificate-password

Configures the password for accessing a public certificate on the switch.
aaa certificate-password password
no aaa certificate-password password
Syntax Definitions
password
Defaults
By default, the certiificate password is set to "alcatel".
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of this command to remove the configured password from the switch configuration.
•
This command is used with the Captive Portal feature to allow public certificate support.
•
The password should match the passhprase used when the certificate was created.
Examples
-> aaa certificate-password certpass
-> no aaa certificate-password
Release History
Release 6.4.4; Command was introduced.
Related Commands
802.1x captive-portal name
MIB Objects
aaaServerTable
aaaCertPassword
OmniSwitch CLI Reference Guide
The password required to access the certificate.
Configures the name of the Captive Portal rediret URL.
June 2012 page 36-31