show port mapping
Displays the configuration of one or more port mapping sessions.
show port mapping [port_mapping_sessionid]
Syntax Definitions
port_mapping_sessionid
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
If you do not specify the port mapping session ID, then the configuration for all the port mapping sessions
will be displayed.
Examples
-> show port mapping 3
SessionID
-----------+----------------+------------------
8
8
8
output definitions
SessionID
USR-PORT
NETWORK-PORT
Release History
Release 6.1.2; command was introduced.
page 39-14
The port mapping session ID. Valid range is 1 to 8.
USR-PORT
NETWORK-PORT
1/2
1/3
1/6
1/7
Displays the port mapping session ID.
Displays the set of user ports of a port mapping session.
Displays the set of network ports of a port mapping session.
Port Mapping Commands
OmniSwitch CLI Reference Guide
June 2012